DECO - FAY

Kim-Dekokim  ELF5-57490

Cement, increased bonding strength polymer additives, and ceramic tile adhesive mortar.

Uses:

  • Interior and exterior vertical and horizontal applications, water absorption rate of 3%′Over the small and medium-sized tiles, used for bonding materials such as ceramic tiles and natural stone.

Method of Application:

Stir thoroughly with water only by mixing the drill is ready. Slow speed drill with mixing until homogenous 5 minutes and mixed again be left without any additional. 25 kg for Teknofay 6-7 lt water is used around.

Surface Preparation:

Surfaces are clean, smooth, must be sturdy and also in balance. Weak parts should be removed and repaired with TDEKO-REP. On the surface oil, There must be dirt and rust. Marble, application will be done on ceramic surfaces should be roughened and Paledyen. Pond would be in a damp concrete floor, but should not be.

Caution:

During the application, work clothes, protective gloves, goggles and masks. Avoid contact with skin and eyes Material, In case of contact, immediately wash with soap and water.

TECHNICAL SPECIFICATIONS
Tensile strength TIME ON HOLD In az 30 minute. After 5 kg / cm2
YAPIŞMA MUKAVEMETİ 5 kg / cm2
SLIP 0,5 mm
COLOR Gray and white
TERM OF USE 30 minute
Hardening time 4 time
READY FOR JOINT FILLING TIME COMING 24 time
CONSUMPTION 1 per mm 1,3 kg / m2
AMOUNT OF WATER USED 25 kg for 6-6,5 lt
SOIL TEMPERATURE +5the C — +25the C
TEMPERATURE RESISTANCE -30the C — +80the C
PACKAGING 25 kg bag
Shelf Life Unopened in original packaging 6 months. Protect from frost and moisture. Store in dry places.